Dynomotion

Group: DynoMotion Message: 4197 From: namorkipast Date: 3/8/2012
Subject: KMotion BUG
I use KMotion 4.28
When i try set bit 168 for swith limit i have warning "Enter an
integer between 0 and 167"
http://dynomotion.com/Help/SchematicsKStep/KStepLimits.png
Wath to do?
Group: DynoMotion Message: 4198 From: TK Date: 3/8/2012
Subject: Re: KMotion BUG
That has been fixed in V4.29z 

The problem was only with the Screen. If you create the hexadecimal code yourself for your C code it should work. 

Regards

TK

On Mar 8, 2012, at 8:52 AM, "namorkipast" <7380003@...> wrote:

 

I use KMotion 4.28
When i try set bit 168 for swith limit i have warning "Enter an
integer between 0 and 167"
http://dynomotion.com/Help/SchematicsKStep/KStepLimits.png
Wath to do?
Group: DynoMotion Message: 4199 From: namorkipast Date: 3/8/2012
Subject: Re: KMotion BUG
May be i do some thing wrong, but i try use C code
I have proxymiti sensor on 168 bit when is work chekbox cheked but nothin hapend and caret move...
Home function work
Jog(0,1000);
while (!ReadBit(168)) ; // loop until IO bit goes high
Jog(0,0); // stop

But when i move manual limit dont work.
i try init
ch0->LimitSwitchOptions=0xa80001;
and
ch0->LimitSwitchOptions=0xa80001;
but no result.
Group: DynoMotion Message: 4200 From: namorkipast Date: 3/8/2012
Subject: Re: KMotion BUG
Limit don't work but when i download axis without limit
axis disabled an in console: "Neg Limit Disabled Axis:0"
Group: DynoMotion Message: 4201 From: Tom Kerekes Date: 3/9/2012
Subject: Re: KMotion BUG
Seems correct to me.  Did you ever resolve this?
 
What sequecnce are you doing?
 
have you watched this video explaining how to set parameters?
 
 
Regards
TK

From: namorkipast <7380003@...>
To: DynoMotion@yahoogroups.com
Sent: Thursday, March 8, 2012 12:00 PM
Subject: [DynoMotion] Re: KMotion BUG

 
May be i do some thing wrong, but i try use C code
I have proxymiti sensor on 168 bit when is work chekbox cheked but nothin hapend and caret move...
Home function work
Jog(0,1000);
while (!ReadBit(168)) ; // loop until IO bit goes high
Jog(0,0); // stop

But when i move manual limit dont work.
i try init
ch0->LimitSwitchOptions=0xa80001;
and
ch0->LimitSwitchOptions=0xa80001;
but no result.
Group: DynoMotion Message: 4202 From: Roman Tsapik Date: 3/9/2012
Subject: Re: KMotion BUG
2012/3/10 Tom Kerekes <tk@...>
 Seems correct to me.  Did you ever resolve this?
 What sequecnce are you doing?
 have you watched this video explaining how to set parameters?
 
 
Regards
TK

I don't watch video, but set as on the video. 
Сan you check the kernel, with sensor set on 168 bits and above?
When sensor pulldown (checkbox in Digital I/O cheked) this is means "stop when low" or high in KMotion configuration?

--
ICQ: 306822889
Skype: tsapik_roman
Group: DynoMotion Message: 4203 From: namorkipast Date: 3/9/2012
Subject: Re: KMotion BUG
I am stupped. I change one file but in init buttom will be another...
But now when i choose "Stop movement" it dont work correct. Karet don,t stop while will not press the button of an emergency stop.
Group: DynoMotion Message: 4207 From: TK Date: 3/10/2012
Subject: Re: KMotion BUG
Please don't use the Stop Movement mode. It issues a feed hold and is not fully implemented. Use the Kill Axis Drive instead. 

TK

On Mar 9, 2012, at 10:44 PM, "namorkipast" <7380003@...> wrote:

 

I am stupped. I change one file but in init buttom will be another...
But now when i choose "Stop movement" it dont work correct. Karet don,t stop while will not press the button of an emergency stop.